Ultimate Body Press Wall Mounted Pull Up Bar

Length:: 9:57 Mins

In this video I go over the pieces that come in the box as well as walking through the entire install process. In order to keep the video under the 10 minute limit I had to speed some parts up, but not much. The entire install process took 15 minutes with an additional 10 minutes for getting out tools and putting them back away.

If you don''t watch the video, let me stress that the INSTRUCTIONS ARE WRONG when they say to pre-drill four 7/16" holes for the lag bolts. You should pre-drill 7/32" holes instead. That''s a big difference!

As far as the bar itself goes, it has turned out to be very solid. I''m 6''7" and 220lbs and the bar holds my weight without any problems at all. One reason I went with the wall-mounted bar instead of one that just hangs in a doorway is because of my height, but I also think this looks better than the door-frame versions and you don''t have to worry about damage to the molding or having to store it. I am completely convinced that this bar will last for years.

When installed, the bar is 12" from the wall and is a total of 38" wide. The front-facing handles stick out about 19.5" (to the very tips). The center-line of the two supports are exactly 16" apart which is great for mounting to typically spaced wall studs (although, you should check where you want to install the bar before ordering).

Although I''m very happy with the Ultimate Body Press Pull-Up Bar, I am docking a star for a couple of reasons:

1) The rubber grip on both front-facing handles is messed up due to the way it was packaged. I showed this in the video as well.

2) Although this was easy to install, the instructions are a joke. There are multiple errors that are fairly serious if you were to follow the directions exactly without thinking it through. In some ways, I probably should have docked 2 stars for this since most of us trust the directions to be right and assume they will start making sense on a future step...

3) I should have mentioned it in the video, but I did end up using different lag bolts than the ones that were provided. (You can see the ones I used were silver and the provided bolts were black.) My main concern was ripping the heads off the bolts with my impact driver...

Overall, if you are looking for a solid wall-mounted pull-up bar, this is an excellent choice. With just a couple of tools and a few minutes you can have a rock solid bar that is out of the way and should last for years.

Now I just need to start improving my pull-up strength!

*** UPDATE 6/30/11 ***

I''ve been using this bar for a few weeks now and it is working great. One thing I''ve found is that it actually works better for me if I keep my back to the wall and do a pullup ''behind'' the bar. (Hopefully that makes sense.) If I do pullups while facing the wall, my body actually ends up being a little too far away from the bar because of the way my feet go forward; but, when my back is to the wall, I get that satisfying feeling of my chin going over the bar.

Another thing I did at first was to pick up some Iron Woody assisted-pullup bands to help increase my strength. Those bands work great for me and I can tell a huge difference already. I can now do 4 whole pull-ups without the bands! (Don''t laugh...)

I''m not sure why some of the other reviewers had problems installing this pull up bar but, in my opinion, giving the product less stars because you can''t install something doesn''t make a lot of sense to me. If you pre-drill the holes correctly and make sure it''s level it should only take you around 15 minutes to install. Granted I did put this up in my garage and easily found the studs because the drywall was not painted.

I love the pull up bar and have been using it for several weeks now. My only complaint is that it is a little pricey for just a pull up bar. Either way I give it five stars for quality and accuracy of product description...it does the job. I use reviews all the time to decide if I should buy a product which can be dangerous because of all the fake posts but, my advice for this pull up bar, don''t let installation deter you from this product...maybe the price though.

Buy Ultimate Body Press Wall Mounted Pull Up Bar Now

The pilot hole recommended was too big. I found out after drilling and seeing the bolt was too loose. Then later, like BK, I broke a bolt using a socket and wratchet, tightening by hand. I weight 270 lbs and am looking forward to actually using the bar. Hopefully, we can salvage the current location and drill a good hole beside the broken off bolt. It seems steady, except, I''d suggest two bolts on the top of each brace, not one. But, that could just be because I''m a fatty. If it fails, it will be from the stress on the top bolts. Well positioned grips and plenty of distance from the wall for freedom of movement, unless you want to swing.

I may be back to give it a 4.

Read Best Reviews of Ultimate Body Press Wall Mounted Pull Up Bar Here

The basic components seem sturdy enough, however.... As I was finishing up screwing the last bolt into the wall, the bolt sheared off at the end of the threads. All of a sudden, I''m looking dumbly at a 1" bolt, sans threads, resting comfortably in the socket of my wrench. The rest of the bolt was stuck in the wood, with no way to pull it out. I followed the directions to a "T" (7/32" predrilled holes, for example). I didn''t overtorque the bolts -heck, I never even finished screwing it in. I wasn''t applying Schwarzenegger force to the bolt either. Fortunately, this was the last bolt, and on the bottom of the wall support, so I can use the bar. Still, a wood screw is a pretty basic component, and not one you expect to fail.

Want Ultimate Body Press Wall Mounted Pull Up Bar Discount?

Works greatinstalls quickly (see notes below)solid construction. I hang my TRX from it as well, so it serves double duty.

Based on the reviews, I went out and bought new lag screws from the hardware store before installing. Still broke one of mine, then quickly broke the provided screw, but finished the jobso before you install, get some spare lagsor just get some heavy duty onesthe ones provided are cheap. I was installing into a solid wood beam., the first lag broke to my stupidity, the second because the provided screws are cheap.

Save 42% off